Sunday, September 22, 2013

[KERNEL]STONE KERNEL FOR GALAXY ACE 2[CLOSED]

I'M IN NO WAY RESPONSIBLE OF ANY DAMAGE CAUSED BY USING THIS CUSTOM KERNEL.
PLEASE NOTE THAT SOME FEATURES CAN DAMAGE YOUR PHONE AND YOUR EAR.
 I WILL SPEND MORE TIME IN SPECIAL KERNEL PROJECT FOR GALAXY ACE 2 
My personal kernel but i want share for all:
What about feature?
It based on Roxsel and have all feature from Roxsel!
p/s: Hope Roxsel team join me as a member to development a best kernel :) 

What is needed:
  • Samsung GT-I8160 (Jellybean)
  • Custom, non stock based ROM(CM, Rootbox,...)
  • Some Android experience

Features:

  1. zram: zRAM supports for android
  2. swap: swap supports
  3. fs: CIFS module
  4. fs: Fsync control [Cocafe]
  5. fs: exfat-nofuse [Dorimanx]
  6. fs/aio: Asynchronous io performance improved
  7. arm: ThumbEE
  8. arm/vfp: Build with neon
  9. arm/crypto: ARM AES and SHA-1 crypto implementation
  10. abb-Regulator: VOTG power supply
  11. abb-Chargalg: Real charged notification
  12. abb-Charger: Charger control
  13. lib: Optimzed CRC32 algorithm [ezekeel]
  14. lib: GNU C version memcpy & string
  15. mmc: spi CRC configurable [Cocafe]
  16. mali: Utilization control
  17. mali: MALI TWEAK[Cocafe]
  18. mali: PM sampling rate tweakable [Cocafe]
  19. kernel: LZO compression
  20. snvet: Reduce the waketime 6s -> 1s
  21. sched: Disable sched debug stuff
  22. debug: Remove Samsung debug code [Adi_Pat]
  23. debug: Android logger as module (free 4mb RAM)
  24. st-mmio: Highlight mode for rear LED flash [Cocafe]
  25. bcmdhd: PM_FAST by default
  26. bcmdhd: Reenable ipv6 and disable multicast in suspend [Andrew Dodd]
  27. random: Entropy tweaks [dorimanx]
  28. random: Frandom module support
  29. staging: Add Snappy and lz4 compression
  30. staging: Lowmemorykiller tweaked
  31. cpufreq: 13 available CPU governors
  32. block: 8 IO schedulers
  33. ramdisk: Init.d scripts
  34. ramdisk: LZO compression
  35. ramdisk: ClockworkMod Recovery 6.0.3.4 [CyanogenMod]
  36. ramdisk: ClockworkMod Touch Recovery 6.0.3.2 [SlimBean]
  37. toolchain: Linaro GCC ARMEABI-GNU 4.7
More details in changelog and Github repo
Installation:

Download kernel
Boot into recovery
Wipe Cache ( Highly Recommended )
Flash Kernel
Reboot
Enjoy !

Downloads:
version 3.0.84:

v3 for 4.2.2 (Special version for JellyBAM)
verison 3.0.87
v4 for 4.2.2 (CWM TOUCH)
version 3.0.96
v5 for 4.2.2 (CWM TOUCH)
v5 for 4.2.2 (CWM original)

v5 for 4.1.2 tester (CWM TOUCH)
v5 for 4.1.2 tester (CWM original)
version 3.0.101
v6 for 4.2.2 (CWM TOUCH)

SOURCE:



Changelog:

v1: intital release (not public)
v2: build with my buildscript (not public)
v3: added SMARTASSH3
v4: REMOVED SMARTASSv2 and H3 to fixing wakeup delay
    + Updated kernel version to 3.0.87
v5: Updated kernel version to 3.0.96
    + Multi support (need tester)
    + some fixes
v6: Update RAMDISK
      Some fixing
      Build with new optimize script
      Lasted source from Roxsel TEAM
      Cleaned
      Update Kernel to 3.0.101 version
v7: Update source
      Cleaning source


CREDIT:

Roxsel team for kernel and ramdisk source
hafidzduddin, cocafe and Adi_Pat for tweaking source

_________________________________________________________________________

67 comments:

  1. wow it support frandom?
    will it be compatible with crossbreeder tweak?
    or is there other way to activate

    ReplyDelete
  2. so which is better v3 jellybam or v5??

    ReplyDelete
    Replies
    1. v5 is better jellybam is special in RECOVERY can use CWM touch or CWM not need use special kernel for jellybam. Use Crossbreeder to enable framdom :)

      Delete
  3. Will kernel v5 work on CM10.1 ?

    ReplyDelete
  4. this kernel work fine for PAC ROM brow...?

    ReplyDelete
  5. Am i idiot or what? when i flash this kernel with Temporary CWM, it just bootloops. Yea i wiped /cache and dalvic-cache
    and for sure, i did wipe /data too
    BTW, when TWRP version is coming?

    ReplyDelete
    Replies
    1. not need only wipe cache, but i only tested 4.2.2 kernel about TWRP why we need, we have CWM TOUCH

      Delete
  6. Where can I download a version of the V6?

    ReplyDelete
  7. No deep sleep after 30 minutes using Lionheart/SIO. Installed using instruction above.
    Running v5 - Touch. Now downloading v5 original, will report tomorrow morning.

    Greetings from Indonesia..

    ReplyDelete
    Replies
    1. Fixed after reflashing and wipe cache before & after. Thank you

      Greetings from Indonesia..

      Delete
  8. intellidemand is most useful thing for people that understand how it works.

    ReplyDelete
  9. will you realese a version for stock rom?

    ReplyDelete
  10. how to turn on VOTG power supply?

    ReplyDelete
  11. I want V6, I need V6!

    ReplyDelete
    Replies
    1. Sorry, but i need do stable jellybam give me more time

      Delete
    2. I want you to be patient and shut up! I need you to shut up!

      Delete
    3. Fuck You Bro!

      Delete
    4. Bro! You Fack You!

      Delete
  12. give the dev more time, who are you, god?

    ReplyDelete
  13. AAAAAAAAA!!! this is fucking joke? AAAAAAAAAAAAAA!!! WTF bro? AAAAAAAAAA!!!

    ReplyDelete
    Replies
    1. Please wait bro i need update and clean source to build stable kernel
      I hope can update kernel to 3.0.101 version :)

      Delete
    2. no rush shine :) roxsel v3 hasnt been released either and these impatient people are rushing devs and swearing (:P)

      Delete
  14. what about V6 ?? we are sick of waiting

    ReplyDelete
    Replies
    1. SHUT UP IM SICK OF YOUR WHINING

      Delete
    2. go buy yourself another phone then, use another kernel then, why specifically this one? the dev is so patient and yet you are being so damn impatient. you're so good? BUILD IT YOURSELF

      Delete
  15. nice one bro! Z!zo must be happy

    ReplyDelete
  16. please support CM 10.2

    ReplyDelete
  17. v6 is amazing, running fast, better than stock CM-based kernel. On Lionheart/sio battery life is also nice :D

    ReplyDelete
  18. v6 will support 4.3 and i need more tester :)

    ReplyDelete
  19. No bugs on v6 like wakeup delay, LPM?

    ReplyDelete
  20. Thanks for you works,Shine!
    Why you not use TWRP? It have problems?

    ReplyDelete
    Replies
    1. So,i instal it on cm10.1 TeamCanjika by Rox on build 17.11 (i8160),and sound in calls not working. (((

      Delete
    2. Im talking about v6.......

      Delete
    3. I'm playing with Omni ROM have TWRP feature and i will learn to port it :) i think it easy

      Delete
    4. you working on Omni rom?? :D

      Delete
  21. waiting vor v6 vor 4.3.1
    It will be very useful

    ReplyDelete
  22. which cache am I supposed to wipe?

    ReplyDelete
  23. any progress on omnirom???

    ReplyDelete
  24. LiquidSmooth in my next project :)

    ReplyDelete
    Replies
    1. Much thanks, good luck shine :)

      Delete
    2. LiquidSmooth KitKat?? :))

      Delete
    3. mirror the link please...

      Delete
  25. Hey, rommaker,
    I've just tested, extensively, what you posted on xdadev, today.
    They will never realize, that you've just made best rom for a2.

    Hey, let's skip my post - I just want to say words of RESPECT to you, you made one and only solution for conscious users.
    DO NOT STOP.

    post made by xoen/nothin.

    ReplyDelete
    Replies
    1. no, every rom is the best, all equally the same. the devs put in hard work to create em. there is no best rom

      Delete
    2. erm, i am talking about liquid.
      it's just great, fast and loaded with great options, although gps is not working, PLEASE, fix it, please...

      Delete
  26. i can bow before you, you proved you knowledge.
    really.

    ReplyDelete
  27. Hello Shine,
    Is it possible to undervolting CPU using your kernel? I'm currently running CM10.1 Team Canjica with Stone Kernel v6.
    Thanks

    Greetings from Indonesia..

    ReplyDelete
  28. Hey, when v7 for 4.3 or 4.4?

    ReplyDelete
  29. I truly like to reading your post. Thank you so much for taking the time to share such a nice information. mobile phone deals

    ReplyDelete
  30. Shine
    link is error
    please.. mirror the link

    ReplyDelete